Smart Acid Evaporation System
-
CIF Smart Acid Evaporation System using state-of-the-art surround and stereo heating technology and smart split design, has the advantage of rapid, effective and convenient digestion. With our unique “one-stop” concept, multi-steps procession including digestion, evaporation and cooling could be completed in the same digestion tank. Two kinds of test tubes (Teflon tube and borosilicate glass tube) are available to meet user’s different requirements and enlarge applicable scope of acids. CIF smart digestion systems are widely used for sample digestion treatment prior to chemical analysis to soil, feed, plant, seed, heavy metal, mineral, etc in labs of: Scientific research department of Universities and scientific research institutes
CIF Smart Acid Evaporation System using state-of-the-art surround and stereo heating technology and smart split design, has the advantage of rapid, effective and convenient digestion. With our unique “one-stop” concept, multi-steps procession including digestion, evaporation and cooling could be completed in the same digestion tank. Two kinds of test tubes (Teflon tube and borosilicate glass tube) are available to meet user’s different requirements and enlarge applicable scope of acids. CIF smart digestion systems are widely used for sample digestion treatment prior to chemical analysis to soil, feed, plant, seed, heavy metal, mineral, etc in labs of: Scientific research department of Universities and scientific research institutes; Foodstuff, medicine, agriculture, forestry, environmental protection, chemical engineering, biochemistry, etc. CIF smart digestion systems could replace micro-wave digestion by using wet digestion methods under atmospheric pressure or micro pressure state. It is an ideal pre-treatment instrument for AA, ICP, ICP-MS, atomic fluorescence and kjeldahl nitrogen determination etc, also it could be used for pre-treatment of microwave digestion and acid evaporation treatments.
Features：
●Safer: Split designed heating modules and controllers. The Controller can be used outside the fume hood to ensure operator’s safety and avoid the controller from damage of corrosive gas.
●More efficiency: State-of-the-art surround and stereo heating technology enhances rapid, effective and convenient digestion.
●Better anti-corrosion performance: The heating module is made of high-density and high-conductivity graphite material with the property of high temperature resistance and high conductivity and high thermal insulation property. The heating module is coated with heat-resistant Teflon coating. Totally enclosed controller is coated with multi-layers anticorrosion painting. The sheath of power cable is made of high corrosion resistance and heat-resistant Teflon FPA treated pipe.
●More reliable: Embedded designed heating modules ensure the reliable, rapid heating and easy maintenance. This feature prolongs its service life 2 to 3 times longer than similar products.
●More accurate: The control system adopts the most advanced intelligent temperature program control technology. User can calibrate temperature to guarantee the best accuracy, uniform and stability. The temperature difference between samples is within ±1℃; There are no metal components on the heating module to avoid pollution, thus ensures the accuracy of the experiment result.
●More beautiful: It’s beautiful and novel in appearance design.
●More durable: It can work continuously more than 48 hours.
●CE labeled, It’s reliable in quality and safety. All our products are with CE label.
Technical parameters：
Two Temperature Control Modules are optional：
CM-I Controller:
●Adopting most advanced intelligent temperature program control technology. Heating temperature, holding time, heating rate and temperature gradient are adjustable.
●5” color LCD touch screen, with man-machine interactive interface.
●Powerful memory can storage 10 protocols with user defined name; each protocol includes 10 segments, totally 100 segments could be defined.
●Accuracy of temperature control: ±0.1℃
●Temperature self-calibration.
●Delayed start.
●Real time displays the program status with curve graph.
●Auto-stop function after the heating cycles completes. Unattended operation.
●Overheat alarm, low temperature alarm, automatic power-off protection.
●Timing boot function.
●Remote control.
CM-II Controller：
●Fuji temperature controller, heating temperature, holding time and heating rate are adjustable.
●Accuracy of temperature control: ±1℃
●Each protocol includes 8 segments.
●Self-adjustment function.
●Timing boot function.
●Overheat alarm, low temperature alarm, Auto-stop function after the heating cycles complete.
NOTE:
●Full range of products can be customized according to user’s requirements.
●Side thermal protection device is optional to avoid burn traumas.
Features：
●Safer: Split designed heating modules and controllers. The Controller can be used outside the fume hood to ensure operator’s safety and avoid the controller from damage of corrosive gas.
●More efficiency: State-of-the-art surround and stereo heating technology enhances rapid, effective and convenient digestion.
●Better anti-corrosion performance: The heating module is made of high-density and high-conductivity graphite material with the property of high temperature resistance and high conductivity and high thermal insulation property. The heating module is coated with heat-resistant Teflon coating. Totally enclosed controller is coated with multi-layers anticorrosion painting. The sheath of power cable is made of high corrosion resistance and heat-resistant Teflon FPA treated pipe.
●More reliable: Embedded designed heating modules ensure the reliable, rapid heating and easy maintenance. This feature prolongs its service life 2 to 3 times longer than similar products.
●More accurate: The control system adopts the most advanced intelligent temperature program control technology. User can calibrate temperature to guarantee the best accuracy, uniform and stability. The temperature difference between samples is within ±1℃; There are no metal components on the heating module to avoid pollution, thus ensures the accuracy of the experiment result.
●More beautiful: It’s beautiful and novel in appearance design.
●More durable: It can work continuously more than 48 hours.
●CE labeled, It’s reliable in quality and safety. All our products are with CE label.
Technical parameters：
Two Temperature Control Modules are optional：
CM-I Controller:
●Adopting most advanced intelligent temperature program control technology. Heating temperature, holding time, heating rate and temperature gradient are adjustable.
●5” color LCD touch screen, with man-machine interactive interface.
●Powerful memory can storage 10 protocols with user defined name; each protocol includes 10 segments, totally 100 segments could be defined.
●Accuracy of temperature control: ±0.1℃
●Temperature self-calibration.
●Delayed start.
●Real time displays the program status with curve graph.
●Auto-stop function after the heating cycles completes. Unattended operation.
●Overheat alarm, low temperature alarm, automatic power-off protection.
●Timing boot function.
●Remote control.
CM-II Controller：
●Fuji temperature controller, heating temperature, holding time and heating rate are adjustable.
●Accuracy of temperature control: ±1℃
●Each protocol includes 8 segments.
●Self-adjustment function.
●Timing boot function.
●Overheat alarm, low temperature alarm, Auto-stop function after the heating cycles complete.
NOTE:
●Full range of products can be customized according to user’s requirements.
●Side thermal protection device is optional to avoid burn traumas.
- Prev_page：None
- Next_page：None